Tap Replacement in Nundah
Tap replacement in Nundah runs from a worn two-handle set on a ridge cottage to a mixer swap in a post-2008 apartment. Every job is done by a licensed plumber, and we're in Nundah most weeks, so the visit fits around your day. Mixers, wall sets, basin, kitchen and laundry fittings all sit inside the one service.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Renting drives plenty of the demand. At the last census only 14.8 percent of dwellings here were owned outright, so many tap swaps are booked by an owner or manager rather than the resident. That changes the paperwork, and this page sets out how.
What Decides the Right Replacement Tap
A mixer tap blends hot and cold at one spout, worked by a single lever or two handles; separate taps keep the two supplies apart. Beyond that choice, the new fitting has to suit what is already there:
- the count and size of the holes cut into your bench or basin;
- whether the tap mounts on the deck or on the wall;
- the supply connections waiting underneath;
- whether an isolation valve sits on each line.
A wall-mounted tap draws its water from pipework inside the wall, so switching between wall and deck styles alters the wall or the basin as well as the tap. That is why the old fitting gets checked before any new one is chosen.
Isolation valves matter more than they sound. A valve on each supply line shuts the water to that one tap without turning off the whole house, which makes later work simpler. Where there is none, the quote covers adding one.
The 9 Litres per Minute Rental Tap Rule
The water efficiency test for Queensland rentals sets a ceiling of 9 litres per minute on internal cold water taps and single mixer taps. An owner can charge a tenant for every litre used only while the property stays inside that limit.
The ceiling covers cold taps over a basin, kitchen sink or laundry trough, mixers included. Bathtub taps, garden taps and the taps feeding washing machines and dishwashers sit outside the rule. For a landlord planning to pass on water costs, the right replacement is a tap that keeps the property inside the limit, and our rental property plumbing page explains the wider charging conditions.
Proof matters as much as the fitting. The Residential Tenancies Authority suggests owners keep plumbing reports, receipts, packaging and warranties or manuals for the taps, so we leave the paperwork with you at the end of the visit.
WaterMark and WELS on a New Tap
WaterMark certification is the proof that a plumbing product meets the safety requirements of Australia's Plumbing Code. Registration under the Water Efficiency Labelling and Standards scheme (WELS) then gives the tap its star rating and water usage label. Both marks must be displayed before we can legally fit the product.
Business Queensland asks for a minimum 3-star WELS rating on every showerhead and tap fitting, and notes the rule does not reach renovations. So a straight swap in an older bathroom is not forced up a star band, while a fresh fit-out is.
Buying online? A listing should display the WaterMark trademark, the specification, the licence number, and the WELS details: registration number or model name, stars and water use. Both registers are searchable, so check before paying.
Do You Need a Licensed Plumber to Fit a Tap
Tap replacement is licensed work in Queensland, and the QBCC's unlicensed list for home owners keeps only one tap job: a washer or jumper valve. Anything beyond that washer belongs with a licensee.
The categories split simply:
A straight swap for the same fitting
is minor work. A QBCC licensee does it without a permit or a Form 4.
A fresh point or a shifted position
in an existing building is notifiable work. The plumber notifies the QBCC on a Form 4 within 10 business days of finishing.
Rentals add one more layer. A tenant who wants to attach a fixture or alter the structure needs written approval on a Form 23, and a manager should not refuse a reasonable request. If a tenant goes ahead without consent, the owner can call it a breach, keep the change as an improvement, or remove the fitting and bill the tenant for the cost.
A drip that only needs washers or a cartridge is a different job, and our tap repairs page covers that call. The same visit can also carry a full toilet installation if the bathroom is being done over, and the parent guide to tap and toilet plumbing lists the rest of the fixture work.
Like for Like or a New Tap Position
Five things move the price of a tap swap:
- the tap type you pick;
- whether the existing valves and supply lines can be kept;
- whether the old holes take the new fitting;
- how easy the space under the sink is to reach;
- how many taps the job covers.
A new position adds the Form 4 lodgement fee, which the licensee pays and may pass on to the owner. The price is agreed on paper before we pick up a tool, so nothing moves after you approve it.
Cottages on Melton Road can hide galvanised supply line under the original bench, and renewing a corroded stretch while the tap is off is often worth doing. The quote reflects what the plumber finds once the old fitting is out.
How a Tap Replacement Visit Runs
- 1
Call or message us
Ring (07) 3524 7137 or use the form and describe what's going on in Nundah. A few details up front mean the right gear comes on the first trip.
- 2
We check the old fitting and its connections
The plumber measures the hole pattern, checks the mounting and inspects the supply lines and valves beneath the basin or sink. You hear which taps suit what you have, and what a shifted position would add.
- 3
Fixed quote, then the work
We give you a fixed quote before any work starts. It's flat-rate pricing with no hidden fees, and we only start once you approve it.
- 4
Settle up your way
Card and EFTPOS payment on site when the job's finished, or Fix now, pay later if that suits you better.
Plumbing job in Nundah?
$0 call-out fees, available 24/7, and same-day where we can.
Tap Replacement Questions From Nundah
Call (07) 3524 7137Can I replace a tap myself in Nundah?
No, you cannot legally swap a whole tap yourself in Queensland. The QBCC guide for home owners names tap replacement as work outside its short unlicensed list. The one exception is a washer or jumper valve, which counts as unregulated work that still has to comply with the standards.
What do WaterMark and WELS mean on a tap?
WaterMark certification shows the tap meets Australia's Plumbing Code, and WELS registration records its stars and water use. Both marks are required before we can legally fit the product, so check the labels or the listing before you buy.
Can a tap be added or moved to a new spot?
Yes, a tap can go into a new position. A new or shifted fixture in an existing building counts as notifiable work, so the licensed plumber lodges a Form 4 with the QBCC within 10 business days of finishing. No council permit applies to that category.
Can a tenant replace a tap in a Nundah rental?
No, a tenant cannot, because the swap is licensed work that the owner or property manager arranges. A tenant who wants to attach a fixture or alter the structure needs written approval on a Form 23, and the manager should not refuse a reasonable request.
What should a replacement tap match on my sink?
Your replacement tap needs to match the hole count and spacing in the sink or basin, the deck or wall mounting, and the supply lines underneath. We check the old fitting before you choose a new one.
Call Us About the New TapWe'll call you back.
Ring (07) 3524 7137 and tell us what's wrong. You get $0 call-out fees, a fixed quote before any work starts and same-day where we can, 7 days a week.
To claim your $0 call-out fee, call (07) 3524 7137 today.